Item Tag: Blue
MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V
MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V ☀️ 30A/60A/100A SOLAR CHARGE CONTROLLER: Our Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A/60A/100A; dual USB output 5V / 2.5A, Built-in industrial microcontroller for automatically management, memorizing various parameters set by the user and the data won’t be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. ☀️ FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc. ☀️ 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery. ☀️ MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. ☀️ OUR SALES SERVICE: Our Solar charge controller built-in instructions, please refer to the operating instructions to learn how to install and use. If you are not satisfied with your order, We have professional customer service personnel who can solve your problems online 24/7. Specifications: Color: Blue / Orange Material: ABSRated Voltage: 12V/24VCharging Mode: PWM+MPPTRated Current: 30A/60A/100AMax PV VOTAGE: 50VMax PV Input Power: 360W(12V) 720(24V)Display: LCD screenSelf-Consumption: <10MAOvercharge Protection: 14.4V / 28.8VOvercharge Float charge: 13.7V / 27.4VCharge Recovery Voltage: 12.6V / 25.2VOver Discharge Protection: 10.7V / 21.4VOver Discharge Recovery: 12.6V / 25.2VDual USB Output: 5V / 2A (charge mobile phone, iPad, etc.) Common Questions Q: How many watts (W) of solar panels can be connected.A: 30A – 720W, 60A – 1440W, 100A – 1680W Q: Does this controller support lithium batteries?A: The new controller can be used for lead-acid batteries and lithium batteries. If you charge lithium batteries, you must set the charging parameters after connecting to the power. Please refer to the manual for details. Q: My solar panel is 36V 200W, can I charge 12V battery?A: To charge a 12V battery, the working voltage of the solar panel can be between 17V and 23V, and for a 24V battery, the working voltage of the solar panel can be between 36V and 46V. Q: Can the inverter be connected to the load side of the controller?A: Please connect the inverter directly to the battery and not to the load terminal of the controller. Q: Does the controller have a requirement for battery capacity?A: No, as long as the voltage corresponds to it (but the maximum current of the board and the battery capacity should correspond). For example, the current of the solar panel is 5 amps, the battery capacity is preferably 50 AH, the current of the solar panel is 10 A, and the battery capacity is preferably 100 AH. Do not use a large board to charge a small battery, which may be dangerous. Q: How do you connect the solar panels, batteries, and controllers?A: Please be sure to connect the battery first (to ensure that the battery is fully charged), then connect the solar panel. When disassembling, please remove the solar panel first, then remove the battery, please connect it exactly as this order, otherwise the controller and other components probably. Working temperature: -35 ℃ -60 ℃12V fits 18V solar panel, 24V fits 36V solar panel12.0 volt lead acid battery correspondingThe float voltage is set to: 13.6The recovery discharge voltage is set to: 12.6The discharge cut-off voltage is set to: 10.712.8 volt lithium iron phosphate battery correspondingThe float voltage is set to: 14.6The recovery discharge voltage is set to: 13.6The discharge cut-off voltage is set to: 11.011.1 volt lithium battery correspondingThe float voltage is set to: 12.6The recovery discharge voltage is set to: 11.6The discharge cut-off voltage is set to: 9.6 30A/60A/100A Our Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A/60A/100A; dual USB output 5V / 2.5A, Built-in industrial microcontroller for automatically management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Functional 3 Stage PWM ControlFully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery. Intelligent ProtectionBuilt-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. Functional LCD ScreenEasy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc. Package includes: 1 x MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V (Please Select Amperage At Above Menu)Shipping Information: Your item Ships Same Day to 1 Business Day from our California Location.
MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V
MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V ☀️ 30A/60A/100A SOLAR CHARGE CONTROLLER: Our Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A/60A/100A; dual USB output 5V / 2.5A, Built-in industrial microcontroller for automatically management, memorizing various parameters set by the user and the data won’t be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. ☀️ FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc. ☀️ 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery. ☀️ MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. ☀️ OUR SALES SERVICE: Our Solar charge controller built-in instructions, please refer to the operating instructions to learn how to install and use. If you are not satisfied with your order, We have professional customer service personnel who can solve your problems online 24/7. Specifications: Color: Blue / Orange Material: ABSRated Voltage: 12V/24VCharging Mode: PWM+MPPTRated Current: 30A/60A/100AMax PV VOTAGE: 50VMax PV Input Power: 360W(12V) 720(24V)Display: LCD screenSelf-Consumption: <10MAOvercharge Protection: 14.4V / 28.8VOvercharge Float charge: 13.7V / 27.4VCharge Recovery Voltage: 12.6V / 25.2VOver Discharge Protection: 10.7V / 21.4VOver Discharge Recovery: 12.6V / 25.2VDual USB Output: 5V / 2A (charge mobile phone, iPad, etc.) Common Questions Q: How many watts (W) of solar panels can be connected.A: 30A – 720W, 60A – 1440W, 100A – 1680W Q: Does this controller support lithium batteries?A: The new controller can be used for lead-acid batteries and lithium batteries. If you charge lithium batteries, you must set the charging parameters after connecting to the power. Please refer to the manual for details. Q: My solar panel is 36V 200W, can I charge 12V battery?A: To charge a 12V battery, the working voltage of the solar panel can be between 17V and 23V, and for a 24V battery, the working voltage of the solar panel can be between 36V and 46V. Q: Can the inverter be connected to the load side of the controller?A: Please connect the inverter directly to the battery and not to the load terminal of the controller. Q: Does the controller have a requirement for battery capacity?A: No, as long as the voltage corresponds to it (but the maximum current of the board and the battery capacity should correspond). For example, the current of the solar panel is 5 amps, the battery capacity is preferably 50 AH, the current of the solar panel is 10 A, and the battery capacity is preferably 100 AH. Do not use a large board to charge a small battery, which may be dangerous. Q: How do you connect the solar panels, batteries, and controllers?A: Please be sure to connect the battery first (to ensure that the battery is fully charged), then connect the solar panel. When disassembling, please remove the solar panel first, then remove the battery, please connect it exactly as this order, otherwise the controller and other components probably. Working temperature: -35 ℃ -60 ℃12V fits 18V solar panel, 24V fits 36V solar panel12.0 volt lead acid battery correspondingThe float voltage is set to: 13.6The recovery discharge voltage is set to: 12.6The discharge cut-off voltage is set to: 10.712.8 volt lithium iron phosphate battery correspondingThe float voltage is set to: 14.6The recovery discharge voltage is set to: 13.6The discharge cut-off voltage is set to: 11.011.1 volt lithium battery correspondingThe float voltage is set to: 12.6The recovery discharge voltage is set to: 11.6The discharge cut-off voltage is set to: 9.6 30A/60A/100A Our Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A/60A/100A; dual USB output 5V / 2.5A, Built-in industrial microcontroller for automatically management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Functional 3 Stage PWM ControlFully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery. Intelligent ProtectionBuilt-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. Functional LCD ScreenEasy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc. Package includes: 1 x MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V (Please Select Amperage At Above Menu)Shipping Information: Your item Ships Same Day to 1 Business Day from our California Location.
ECO-WORTHY Monocrystalline Solar Module
The ECO-WORTHY L02M100-1 100W 12V Monocrystalline Solar Panel is a high-quality solar panel designed for maximum power output. With a rigid construction and reinforced glass material, it is suitable for both indoor and outdoor environments. The panel is corrosion-resistant and can withstand all daylight conditions, making it ideal for use in boats, RVs, and vehicles. Its compact size of 38 x 21 inches and blue color make it a stylish addition to any home or garden. With a power optimizer inverter technology and Amphenol connector type, this solar panel is a reliable and efficient choice for alternative energy supplies.
200W Portable Folding Solar Panel Charger Power Station IP65 for Home RV Camping
With excellent 95% transparency, 200W Solar Panel performs better than similarly-rated polycrystalline solar panels in low-light conditions,and much higher than the market’s average. 【Compatible with Most Solar Generators】 : 200W foldable solar panel uses MC4 connector & is designed to be used with most solar generators on the market.
POWOXI 7.5w 12v Solar Battery Trickle Charger Solar Cell Charger for car US
Note: Please look for the brand POWOXI. We are official and genuine products, and our customers enjoy 12-month free warranty service and lifetime technical support. Thank you for supporting and choosing POWOXI. POWOXI Solar Trickle Battery Charger & Maintainer for 12 Volts Battery Daily Why Use POWOXI Solar Trickle Charger? 1. When the car is not in use, the car battery power drops down. When the car is turned off, the battery is connected to the car. More than 30 body control modules on the car still consume power even when the engine is turned off, such as anti-theft alarms, warning lights, and anti-theft locks. 2. If the car battery always runs low, it will make the battery die faster. When the car battery is short of power for a long time, it weakens the storage function of the batteries and even kills the battery. Because the car installed consumable devices like a monitor and alarm system, they will drain out battery even don’t drive a car. That’s why after a long time sitting your car can’t start up. Benefits of using POWOXI Solar Cell Trickle Charger: 1、POWOXI solar charger maintainer and battery charger are for maintaining a 12-volt battery daily. You’d never have to worry about battery drain out anymore! 2、Efficient solar panels absorb sunlight and convert it into electricity for charging 12V batteries. No electricity bill is required! 3、Solar chargers don’t consume battery power as they are equipped with anti-reverse diodes that prevent the battery from reverse-charging. The solar charger won’t overcharge or damage the battery. 4、Solar charger is perfect for cars, trucks, motorcycles, campers, RV, boats, tractors, lawnmowers, farm equipment, and most 12-volt cycle batteries. The unit is maintenance-free and will protect the battery against the discharge process that occurs naturally within a lead-acid battery. Solar Trickle Charger is just a battery maintainer, that can keep 12v batteries charged from going dead and extend the usage life of the battery. 1、It’s crucial to pay close attention to the positive and negative polarity during the installation process. 2、To avoid any potential risks, never allow the positive and negative terminals of your battery to touch or connect. Although the likelihood of accidents is extremely low, it’s imperative to exercise caution during the installation to prevent any unintended short-circuiting. Q&A Q1: What types of batteries it can maintain? A1: POWOXI solar battery charger is suitable for maintaining any rechargeable 12V Batteries. ( lncluding Lithium-ion, LiFePO4, Gel, AGM, etc.) —— Q2: Do I need to disconnect while driving? A2: You don’t need to disconnect. Our solar panel has overcharge protection circuitry built into the panel, to prevent reverse charging. —— Q3: Can a solar panel charge a car battery through a cigarette lighter when the car is off? A3: Most cars can be charged with a cigarette lighter when the engine is turned off. When it is found that the cigarette lighter can not be used to recharge the battery. You can use alligator clips and cables to connect directly to the battery. —— Q4: How to know if the solar panel charger is working? A4: In full sunlight, the solar panel shows a red light. Connect the battery, and turn green. If there are no lights, check the polarity. —— Q5: Can I charge a battery that is almost dead? A5: It is a trickle charger that keeps the voltage from dropping or recharging the battery, but it is not a fast charger and cannot charge a dead battery. Please use the AC charger to fully charge the battery before using the solar panel.
SP21 2 Pin Waterproof Aviation Circular Pair Connector 30A 12/24V 2 Pin 30A
SP21 2 Pin Waterproof Aviation Circular Pair Connector 30A 12/24V Power AC DC Outdoor Solar Portable Power Station Automotive Application. Resistance 1mΩ. Wire Size 11 12 14 16 18 AWG or smaller than 4mm².